Drag to compare

BEFORE & AFTER

Same slab, same room, same light — just a few days apart. Grab the handle and slide it across to see what a proper grind, patch and pour actually changes.

AI transformation visualizer

SEE YOUR OWN ROOM

Upload a photo of your garage, deck, patio, kitchen or basement and our AI reimagines it with a poured epoxy finish — then drag the slider to compare it with the room you started with. Swap the look, swap the color, do it as many times as you want.

The same garage finished with a gray and blue broadcast flake epoxy floor
Bare stained concrete garage floor with an oil spot before epoxy was applied
BeforeAfter

Northwest Arkansas · Flake system

Two-Car Garage Flake Floor

Bare slab with a stubborn oil stain and dusty, porous concrete. We ground it down, patched it flat, then broadcast a full coverage gray-and-blue flake blend and sealed it with a clear topcoat. No more dust, no more stains — just a floor you can hose off.

  • 2 days

    on site start to finish

  • Full flake

    broadcast to refusal

  • Sealed

    clear polyaspartic topcoat

The same pool deck resurfaced in a warm terracotta finish with landscaping and lounge seating
Plain cracked concrete pool deck with stains before resurfacing
BeforeAfter

Northwest Arkansas · Outdoor coating

Backyard Pool Deck Resurface

A tired, cracked slab ringing the pool — chalky, stained, and hot underfoot. We cleaned and repaired the concrete, then laid down a warm terracotta decorative coating with a UV-stable, slip-resistant seal. Same footprint, completely different backyard.

  • UV stable

    won't yellow in full sun

  • Slip resistant

    textured poolside finish

  • Sealed

    hose-off easy cleanup

The same sunroom finished with a glossy black, white and silver metallic marble epoxy floor reflecting the windows
Stripped sunroom with bare, patched concrete subfloor and mixing buckets before the epoxy pour
BeforeAfter

Northwest Arkansas · Metallic marble system

Sunroom Metallic Marble Pour

Carpet and tack strip came out, leaving a patched, chalky subfloor. We ground it clean, filled the cracks, then hand-poured a black, white and silver metallic marble that we feathered by hand while it moved. The gloss coat turns the whole room into a reflection of its own windows.

  • Hand poured

    veining pulled by hand

  • Mirror gloss

    reflects the window light

  • Seamless

    no grout, no seams

WHAT WOULD YOURS LOOK LIKE?

Send a photo of your slab and we'll tell you what it needs and what the finished floor would cost.

Disclaimer

Every photo, video and preview on this site represents a unique, one-off job. Epoxy and metallic resin are hand-poured, so slab condition, prep, room lighting, temperature, humidity and the way pigment moves during the pour yield a different finished project every single time. AI-generated previews from our visualizer are artistic impressions only and are not a guarantee of results, color, pattern, sheen, texture or cost. No two floors are identical and yours will not be an exact match to any image shown here. Final color and finish are always confirmed on site with physical sample boards before any material is mixed. Nothing on this site is an offer, estimate, warranty or contract. See our Terms of Use and Privacy Policy.