Pricing
The short answer
Professional garage floor coating in Northwest Arkansas typically runs $6–$16 per square foot installed. A standard two-car garage lands around $2,600–$4,500 for a ground-and-flaked system, and $4,000–$7,500 for a metallic showroom finish. Slab repair, moisture mitigation and finish choice move the number most.
Side by side
| Garage size | Flake system | Metallic / showroom | 1-day polyaspartic |
|---|---|---|---|
| 1 car (~250 sq ft) | $1,500 – $2,600 | $2,300 – $4,000 | $2,000 – $3,200 |
| 2 car (~450 sq ft) | $2,600 – $4,500 | $4,000 – $7,500 | $3,600 – $5,800 |
| 3 car (~700 sq ft) | $3,900 – $6,500 | $6,000 – $11,000 | $5,600 – $9,100 |
| Shop / detached (1,000+ sq ft) | Quoted per sq ft | Quoted per sq ft | Quoted per sq ft |
A quote that comes in dramatically under everyone else is almost always skipping mechanical prep, using a water-based or partial-solids product, or applying a thin single coat with no topcoat. You'll get a nice-looking floor for one summer and hot-tire peel by the next. The material is a small slice of the cost — grinding, repair and labor are the job.
Diamond grinding wall to wall, HEPA vacuum, crack and pit repair, moisture testing, full-broadcast flake or metallic pour, and a topcoat rated for vehicles. No add-on line for prep, because prep isn't optional.
Send photos of the whole floor, close-ups of any cracks or oil staining, and rough measurements. We can usually give a tight range the same day and confirm it when we see the slab.
Real Northwest Arkansas numbers
Diamond grinding (included)
Included
Never optional in our work
Crack, pit and spall repair
$150 – $600
Depends on the slab
Moisture-mitigating primer
$1 – $2 / sq ft
Only when tests call for it
Anti-slip additive
$0.25 – $0.75 / sq ft
Recommended near entries
Custom logo inlay
$400 – $1,500
Sealed inside the floor
Baseboard / cove up the wall
$6 – $12 / linear ft
Popular in shops
Ranges are typical Northwest Arkansas installed prices for a professionally prepped floor. Your number depends on slab condition, moisture, repairs and the finish you pick — we quote in person or from photos.
Local conditions
Real pours in Northwest Arkansas
Questions we actually get asked
Keep reading
Tell us how you use the space — gym, shop, showroom, daily driver — send a couple of photos, and Sarah will tell you exactly which system fits and what it costs.
Northwest Arkansas · Mon–Sat, 8am–6pm
Disclaimer
Every photo, video and preview on this site represents a unique, one-off job. Epoxy and metallic resin are hand-poured, so slab condition, prep, room lighting, temperature, humidity and the way pigment moves during the pour yield a different finished project every single time. AI-generated previews from our visualizer are artistic impressions only and are not a guarantee of results, color, pattern, sheen, texture or cost. No two floors are identical and yours will not be an exact match to any image shown here. Final color and finish are always confirmed on site with physical sample boards before any material is mixed. Nothing on this site is an offer, estimate, warranty or contract. See our Terms of Use and Privacy Policy.