Not sure what you need?
Most worn floors, counters, vanities, showers and shop slabs in Northwest Arkansas can be coated in place — for less money, in less time, with no dumpster in the driveway.
Resurfacing a concrete floor with epoxy runs $4 to $12 per square foot installed, and countertops, vanities or shower surrounds run $35 to $70 per square foot. That's typically half the cost of replacement because the surface you already own becomes the substrate — no demolition, disposal or plumbing work, and most projects finish in one to three days.
Plenty of people call asking about painting concrete, retiling a shower or pricing granite. Here's how each of those compares to coating what's already there.
| If you're searching for | Consider instead | Why | Typical cost |
|---|---|---|---|
| Concrete painting or garage floor paint | Ground-and-poured flake or solid color coating | Paint is 3–5 mils and lifts with hot tires. A coating is 20–60+ mils over a diamond-ground slab. | $3–$9 / sq ft |
| Marble or stone flooring | Metallic epoxy marble-look floor | Same depth and veining, no grout lines, no sealing, no acid etching from wine or citrus. | $8–$14 / sq ft |
| New granite or quartz countertops | Poured epoxy countertop over your existing tops | No demolition, no plumbing reset, and the veining is drawn to your cabinets and lighting. | $35–$70 / sq ft |
| Countertop refinishing kit | Professionally poured flood coat | Kits are rolled film that wears at the edges and sink cutout within a year or two. | $35–$70 / sq ft |
| Bathtub, vanity or cultured marble refinishing | Bath-rated resin resurfacing in place | Yellowed cultured marble gets a fresh, modern surface without pulling plumbing. | $35–$70 / sq ft |
| Retiling a shower or surround | Seamless resin wall panels over sound tile | No grout and no caulk joints — nothing porous left for mildew and hard water. | $35–$70 / sq ft |
| Commercial VCT, sealed concrete or shop floor | Epoxy or polyaspartic commercial system | No strip-and-wax cycle, seamless for sanitation, back in light service in about 24 hours. | $4–$12 / sq ft |
| Tile or LVP in a garage, basement or patio | Coated slab with slip-resistant texture | Seams trap Arkansas moisture; a bonded coating handles freeze-thaw, humidity and hot tires. | $4–$12 / sq ft |
Questions people ask
Send a photo and rough square footage and Sarah will come back with a real number — no showroom trip, no pressure.
Disclaimer
Every photo, video and preview on this site represents a unique, one-off job. Epoxy and metallic resin are hand-poured, so slab condition, prep, room lighting, temperature, humidity and the way pigment moves during the pour yield a different finished project every single time. AI-generated previews from our visualizer are artistic impressions only and are not a guarantee of results, color, pattern, sheen, texture or cost. No two floors are identical and yours will not be an exact match to any image shown here. Final color and finish are always confirmed on site with physical sample boards before any material is mixed. Nothing on this site is an offer, estimate, warranty or contract. See our Terms of Use and Privacy Policy.